, o ne. 20 stern ave. springfield, new jersey 07081 u.s.a. zy1.zy11 thruzy200 telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 zener diodes do-41 plastic features silicon power zener diodes max. 00.11 (27) , cathode mark max. 0 0.035 (0.9) dimensions are in inches and (millimeters) ? for use in stabilizing and clipping circuits with high power rating ? the zener voltages are graded according to the international e 24 standard. smaller voltage toler- ances are available upon request. mechanical data case: do-41 plastic case weight: approx. 0.34 g maximum ratings ratings at 25c ambient temperature unless otherwise specified. zener current (see table "characteristics") power dissipation at tamb = 25c junction temperature storage temperature range symbol plot tj ts value 2.01> 150 -55 to +150 unit watts c c thermal resistance junction to ambient air symbol rthja min. - typ. _ max. 601> unit c/w notes: (1) valid provided that leads are kept at ambient temperature at a distance of 10 mm from case. nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to.be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders. quality semi-conductors
zy1.zy11 thruzy200 electrical characteristics ratings at 25c ambient temperature unless otherwise specified. type zy1(3) zy11 zy12 zy13 zy15 zy16 zy18 zy20 zy22 zy24 zy27 zy30 zy33 zy36 zy39 zy43 zy47 zy51 zy56 zy62 zy68 zy75 zy82 zy91 zy100 ZY110 zy120 zy130 zy150 zy160 zy180 zy200 zener voltage12' at izt vz(v) 0.71 ... 0.82 10.4 ... 11.6 11.4 ... 12.7 12.4 ... 14.1 13.8 ... 15.8 15.3 ... 17.1 16.8 ... 19.1 18.8 ... 21.2 20.8 ... 23.3 22.8 ... 25.6 25.1 ... 28.9 28 ... 32 31 ... 35 34 ... 38 37 ... 41 40 ... 46 44 ... 50 48 ... 54 52 ... 60 58 ... 66 64 ... 72 70 ... 79 77 ... 88 85 ... 96 94 ... 106 104 ...116 114 ... 127 124 ... 141 138 ... 156 153 ...171 168 ... 191 188 ... 212 dynamic resistance at izt f = 1 khz max rzj (q) 0.5 (< 1) 4(<7) 4(<7) 5(< 10) 5(< 10) 6(< 15) 6(<15) 6(<15) 6(<15) 7(<15) 7(<15) 8(<15) 8(< 15) 21 (< 40) 21 (< 40) 24 (< 45) 24 (< 45) 25 (< 60) 25 (< 60) 25 (< 80) 25 (< 80) 30 (< 100) 30 (< 100) 60 (< 200) 60 (< 200) 80 (< 250) 80 (< 250) 110 (< 300) 110 (< 300) 150(<350) 150(<350) 150(<350) temp, coeff. of zener volt, at izt avz(1q-*/k) -26 ... -16 +5 ... +10 +5 ... +10 +5 ... +10 +5 ... +10 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +6 ... +11 +7 ... +12 +7 ... +12 +7 ... +12 +7 ... +12 +8 ... +13 +8 ... +13 +8 ... +13 +8 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 +9 ... +13 test current izt (ma) 100 50 50 50 50 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 reverse voltage at |r= o.sna vr(v) _ >9.2 > 10 > 10.7 > 12 > 13.3 > 14.7 > 16.5 >18.3 >20.1 >22.5 >25.1 >27.8 >30.2 > 32.9 > 35.6 > 39.2 >42.8 >47.3 >51.7 >57.1 >63.2 >68.6 >75.7 >83.7 >92.6 > 101.6 > 110.5 > 123 >136 > 149 > 167 admissible zener current'1' at tamb = 25c iz (ma) 1000 135 120 110 98 90 80 72 66 60 53 48 44 40 37 33 30 27 25 21 20 18 16 15 13 12 11 10 9 8.5 8 7.5 notes: (1) valid provided that leads are kept at ambient temperature at a distance of 10 mm from case (2) tested with pulses tp = 5 ms (3) the zy1 is a silicon diode operated in forward direction. hence, the index of all parameters ratings should be "f" instead of "z". connect the cathode lead to the
|
